如下代码将数组存放在RAM空间：

__attribute__((aligned(4))) unsigned char _Zhi_24_32[] = {

  0x00,0x00,0x00,0x06,0x00,0x00,0x0E,0x00,0x00,0x0C,0x00,0x00,0x1F,0xFB,0xFE,0x1F,

  0xFB,0xFE,0x31,0x83,0x06,0x71,0x83,0x06,0x21,0x83,0x06,0x7F,0xFB,0x06,0x7F,0xFB,

  0x06,0x03,0x03,0x06,0x03,0xC3,0x06,0x07,0xE3,0xFE,0x06,0x3B,0xFE,0x0E,0x1B,0x06,

  0x3C,0x03,0x06,0x70,0x00,0x00,0x27,0xFF,0xFC,0x07,0xFF,0xFC,0x06,0x00,0x0C,0x06,

  0x00,0x0C,0x06,0x00,0x0C,0x07,0xFF,0xFC,0x07,0xFF,0xFC,0x06,0x00,0x0C,0x06,0x00,

  0x0C,0x06,0x00,0x0C,0x07,0xFF,0xFC,0x07,0xFF,0xFC,0x06,0x00,0x0C,0x00,0x00,0x00

  };

请问在MounRiver Studio中如何将数组定义在 程序（Code）空间？

定义数组时加const修饰。